How much does an AC tune-up cost?

AC tune-up typically costs $80–$150. It usually includes inspection, cleaning, refrigerant check, and basic adjustments. Some companies offer seasonal specials.

How much does furnace maintenance cost?

Furnace tune-up typically costs $80–$150. It usually includes inspection, filter check, burners, and safety checks. Done in fall before heating season.

Are HVAC maintenance plans worth it?

Plans often include two tune-ups (AC and furnace), priority scheduling, and discounts on repairs. If you’d pay for two tune-ups anyway, a plan can save 10–20% and simplify scheduling. Compare plan cost to à la carte tune-ups.

How often should I have HVAC maintenance?

Once per year for AC (spring) and once for furnace (fall), or per manufacturer recommendations. Heat pumps may need one or two visits. Regular maintenance can extend life and catch small issues early.

What is included in an HVAC tune-up?

Typical tune-up: inspect and clean components, check refrigerant (AC) or burners (furnace), check electrical connections, test safety controls, and replace or check filter. Exact scope varies by company.

How much does evaporator coil cleaning cost?

Evaporator coil cleaning often runs $150–$350 depending on access and system size. Dirty coils reduce efficiency; cleaning can improve performance. Some tune-ups include basic coil inspection.

Can I do HVAC maintenance myself?

You can change filters, keep outdoor unit clear, and check vents. Professional tune-ups include refrigerant checks, electrical and safety checks, and cleaning that require training and tools. Many homeowners do both: DIY basics + annual pro tune-up.

Do maintenance plans cover repairs?

Most plans cover tune-ups and sometimes discounts on repairs; they usually don’t cover full repair cost. Read the plan terms. Some include priority service or waived diagnostic fees.

How much does it cost to clean AC coils?

Outdoor (condenser) coil cleaning is often part of a tune-up ($80–$150). Indoor (evaporator) coil cleaning may be $150–$350. Heavy cleaning or hard-to-reach coils cost more.

When should I schedule AC maintenance?

Spring, before cooling season, is ideal. Scheduling early can avoid peak demand. Some companies offer discounts for off-peak scheduling.

What is the average cost of a furnace tune-up?

Furnace tune-up typically runs $80–$150. Plans that include furnace and AC tune-ups often run $200–$400 per year.

Are there rebates for HVAC maintenance?

Some utility programs offer discounted tune-ups or incentives for maintenance. Check your utility. Warranties may require proof of maintenance for validity.

How long does an HVAC tune-up take?

Single system tune-up often takes 45–90 minutes. AC and furnace together may take 1.5–2.5 hours.

What happens if I skip HVAC maintenance?

Systems may run less efficiently, have shorter lifespans, and small issues can become costly repairs. Some warranties require annual maintenance. Skipping is possible but not recommended.

HVAC Maintenance Cost Calculator

Q: How much does HVAC maintenance cost?

Single tune-up (AC or furnace) typically costs $80–$150. AC and furnace tune-up together often runs $150–$280. Annual maintenance plans (2 visits) are often $200–$400/year. Filter-only service is $30–$60; coil cleaning $150–$350.

Q: What affects HVAC maintenance cost?

Type of service (tune-up vs plan vs coil cleaning), system type (AC, furnace, heat pump), number of systems, and location. Plans may offer better value than single visits.

Estimate HVAC maintenance cost: tune-ups, annual plans, filter changes, and coil cleaning by system type and location. Get low, average, and high estimates below.

How much does HVAC maintenance cost?

Single tune-up (AC or furnace) typically costs $80–$150; AC and furnace together $150–$280. Annual plans (2 visits) often run $200–$400. Coil cleaning $150–$350. Costs vary by service and location.

Get your HVAC maintenance estimate

Project details

Enter your project specifications to get a cost range.

Service type

System type

Location / labor market

Cost estimate

A range based on the details you entered — not a quote.

Fill in the project details to see your cost range.

How to read this estimate

These figures are based on national average material and labor costs adjusted for the options you selected. Actual pricing varies with your local market, site conditions, material availability and contractor workload. Always get two or three written quotes before committing to a project.

Average HVAC Maintenance Cost

Cost by service type

Typical range

Service	Est. cost
Single tune-up (AC or furnace)	$80–$150
AC + furnace tune-up	$150–$280
Annual plan (2 visits)	$200–$400
Filter change only	$30–$60
Coil cleaning	$150–$350

What’s usually included

Typical tune-up scope

• Inspect and clean components
• Check refrigerant (AC) or burners (furnace)
• Check electrical and safety controls
• Replace or check filter
• Basic performance check

What Affects HVAC Maintenance Cost?

Service type — Tune-up vs plan vs coil cleaning.
System type — AC, furnace, heat pump, or both.
Location — Labor rates vary.
Plan benefits — Discounts and priority service may add value.

Data from contractor pricing

Updated regularly

No sign-up required

Free estimates

Compare plans

And single-visit pricing

HVAC Maintenance Cost FAQs

Common questions about tune-up cost, plans, and what’s included.

Schedule HVAC maintenance

Compare local HVAC companies and maintenance plans.

Explore all calculators Contact us

Related Cost Calculators

Disclaimer: Estimates are for planning only. Actual costs depend on service scope and location. Compare plans and single-visit pricing.