Metal Roof Installation Cost Calculator
Use this free metal roof installation cost calculator to get an instant estimate by roof size, metal type (standing seam, corrugated, metal shingles, stone-coated steel), pitch, and location. Most metal roofs run $8,000–$25,000 for a typical home. Get a low, average, and high estimate plus cost per square foot below.
How much does a metal roof cost?
A metal roof typically costs $8,000–$25,000 for a 2,000 sq ft home, or $6–$14+ per square foot installed. Standing seam is the most expensive; corrugated is the most economical. Metal lasts 40–70 years. Get 2–3 local quotes for an accurate price.
Get your metal roof installation estimate
Project Details
Enter your project specifications to get an accurate cost estimate
Cost Estimate
Your estimated project costs based on the provided information
Fill in the project details and click "Calculate Estimate" to see your cost breakdown
Important Disclaimer:
These estimates are based on current market data and average costs. Actual costs may vary depending on your location, specific materials chosen, contractor rates, and project complexity. We recommend getting multiple quotes from local contractors for the most accurate pricing.
Average Metal Roof Installation Cost
National averages for metal roofing range from about $8,000 to $25,000 depending on size, metal type, and location. Below are typical ranges by project size and by metal type.
Cost by project size
Typical total cost (standing seam, with tear-off)
| Project size | Estimated cost |
|---|---|
| Small (1,000–1,500 sq ft) | $9,000–$16,000 |
| Medium (1,500–2,200 sq ft) | $14,000–$24,000 |
| Large (2,200–3,000 sq ft) | $18,000–$32,000 |
| Extra large (3,000+ sq ft) | $24,000–$42,000+ |
Cost by metal type (per sq ft)
Installed cost ranges
| Metal type | Est. cost per sq ft |
|---|---|
| Corrugated / exposed fastener | $5–$8 |
| Metal shingles / panels | $6–$10 |
| Standing seam | $9–$14 |
| Stone-coated steel | $10–$15+ |
What Affects Metal Roof Installation Cost?
Metal type, roof size, pitch, complexity, tear-off, and location drive most of the variation.
- Metal type — Standing seam and stone-coated cost more; corrugated is most economical.
- Roof size & pitch — More area and steeper pitch increase materials and labor.
- Complexity — Valleys, dormers, and penetrations add labor and trim cost.
- Tear-off — Removing existing roofing adds cost; required for a proper metal installation in most cases.
- Location — Labor and material costs vary by region; specialty metal installers may charge more.
- Gauge & finish — Thicker gauge and premium coatings increase material cost and longevity.
Data from contractor quotes & supplier pricing
Updated regularly
No sign-up required
Free instant estimates
Used for project planning
Get 2–3 local quotes to confirm
Metal Roof Installation Cost FAQs
Common questions about metal roof cost, standing seam vs corrugated, and longevity.
Get a contractor quote
Use your estimate to compare quotes. Save or share your results above, then request quotes from licensed, experienced metal roof installers for an accurate price.
Related Cost Calculators
Disclaimer: These estimates are for planning only and are based on national averages and typical metal roof projects. Actual costs depend on your location, exact metal type and gauge, contractor experience, and site conditions. Always get 2–3 written quotes from licensed, experienced metal roof installers before committing to a new roof.